Turn heads and stand out from the crowd with this 4" Lift Kit that lets you clear 35" tires. You'll definitely make a statement with this easy-to install kit, complete with coil front springs & cast blocks for the back of your Diesel 4WD 2008 - 2010 Ford F-250 / F-350
- Full length replacement coil springs add additional ride height while maintaining ride quality
- Heavy-duty track bar re-centers front axle, adds strength and limits lateral movement
- High-strength, black e-coated U-bolts
- Larger rear lift blocks and longer U-bolts replace the factory hardware for an easy install and level stance
- Radius arm drop brackets correction position front axle allowing use of the factory radius arms
Information:
Check Your Rear Springs: If your vehicle is equipped with both a stock 4" rear block and a top mounted overload/helper spring, select the longer 18.5" Rear U-Bolts.
Factory wheels fit when paired with factory / original equipment tire size.
Mod's Required: Exhaust modification may be required to clear the front driveshaft on gas models. See installation instructions for more information.
Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Application Summary:
| Year |
Make/Model |
| 2008-2010 |
Ford F-250 Super Duty |
| 2008-2010 |
Ford F-350 Super Duty |
This item is a package with the following components:
| Attributes |
| Accommodates Factory Wheels |
See Notes |
| Adjustable |
No |
| Alternate Part Number |
ZONF6 |
| Back Spacing |
4.5" |
| Back Spacing 2 |
4.5" |
| Back Spacing 3 |
4.5" |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| Finish |
Powdercoat |
| Front Lift Height |
4" |
| Front Lift Method |
Coil Springs & Bracket Kit |
| GTIN |
00810156366178 |
| Hazardous Material Code |
N |
| Installation Difficulty |
2 out of 5 |
| Installation Time |
6 hrs |
| Life Cycle Status Code |
Available to Order |
| Lift Type |
Lift Kit |
| Material |
Metal |
| Max Tire Size |
35 x 12.5 |
| Max Tire Size 2 |
35 x 12.5 |
| Max Tire Size 3 |
35 x 12.5 |
| NAFTA Preference Criterion Code |
B |
| Rear Lift Height |
2.5" |
| Rear Lift Method |
Cast Blocks |
| Requires Metal Cutting |
No |
| Requires Welding |
No |
| SDR Required Flag |
N |
| Wheel Size |
17 x 9 |
| Wheel Size 2 |
18 x 9 |
| Wheel Size 3 |
20 x 9 |
