ICON's 2.5 Series Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to Ford Super Duty trucks. They have been designed to increase the overall damping ability while also allowing ride height adjustment.
Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
- Bolt-in system fits in OE coil bucket location
- FK Rod End bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Ride height adjustable coilovers
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- Decreased body roll and improved on and off-road ride dynamics
- Vehicle-specific shock valving provides unparalleled ride quality and control
- Coilover conversion allows for addition of optional secondary shocks
- Corrosion resistant CAD plated coilover shock body with 7/8" shaft
- ICON engineered coil springs guaranteed for life against sagging or breakage
Information:
TECH NOTE: 2005-2019 Super Duty diesel models will have front lift height range of 4-5.5" over stock
Application Summary:
| Year |
Make/Model |
| 2017-2025 |
Ford F-250 Super Duty |
| 2017-2025 |
Ford F-350 Super Duty |
| Attributes |
| AAP_UDA_12 |
EA |
| AAP_UDA_22 |
1 |
| AAP_UDA_4 |
55 |
| Add-On Part |
198000 - 2 PIN COILOVER SPANNER WRENCH KIT, 198001 - BILLET SPANNER WRENCH KIT |
| Adjustable Dampening |
Yes |
| Adjustable Damping |
Electronically, Yes |
| Adjustable Height |
Yes |
| Adjustable Rebound |
No |
| Body Diameter |
2.5 |
| Boot Included |
No |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Coil Over Springs Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Cylinder Color |
Silver |
| Cylinder Finish |
Cadmium Plated |
| Cylinder Material |
Steel |
| Damping Adjustment Type |
Electronic, Electronic |
| Damping Type |
Oil, Oil |
| Dust Shield |
No, No |
| Dust Shield Included |
No |
| GTIN |
00840103414447 |
| Gas Charged |
Yes |
| Grade Type |
Performance, Performance |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Internal Construction Type |
Single Tube |
| Life Cycle Status Code |
Available to Order |
| Lower Mount Type |
Eyelet |
| Material |
Aluminum, Steel |
| Maximum Lift |
6.25, 6.25 |
| Minimum Lift |
3.5 |
| NAFTA Preference Criterion Code |
C |
| OEM Wheels & Tires Fitment |
Yes, Yes |
| Recommended Aftermarket Tires |
37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required), 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required) |
| Recommended Aftermarket Wheels |
ICON Alloys |
| Remote Reservoir |
Yes |
| Reservoir Style |
Remote |
| SDR Required Flag |
N |
| Service Parts |
191016 - 7.5" FINNED RESI UPGRADE KIT, 252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT |
| Shaft Diameter |
0.875, 0.875 |
| Shock Absorber Body End Measuring Point |
Top of Upper Mount Plate |
| Shock Absorber Rod End Measuring Point |
Center of Eylet |
| Spring Color |
Black, Black |
| Spring Material |
Steel, Steel |
| Spring Rate Type |
Linear, Linear |
| Upper Mount Type |
Mounting Plate |
| Warranty Time |
1 |
