ICON Omega Bypass shocks are designed to give your vehicle outstanding performance on and off-road. They are configured specifically for each application and allow the user to customize the ride through adjustment of the bypass valves.
ICON Omega Series Bypass shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in length but allow the user to customize the ride characteristics to their liking through adjustment of the bypass valves. Like all ICON shock absorbers, Omega Series shocks are 100% rebuildable and 100% revalveable. ICON’s use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal “Bump Zone” that when used, creates a significant increase in damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON Bypass Valve is an externally adjustable valve that restricts oil flow through the bypass tube and provides 28 settings of compression and rebound adjustment with no tools required.
- ICON's Bypass Valve technology allows adjustment of compression and rebound damping with high resolution across the entire adjustment range
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- Polyurethane bushings and forged steel mounting stems for OE factory type fitment
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- 100% Rebuildable
- 100% Revalveable
- Hand adjustable bypass valves with 28 detented settings at quarter turn increments for precise suspension tuning
- Bypass tubes are replaceable in the event of damage
- Internal “Bump Zone” increases damping force to provide more control as the shock approaches full compression
Information:
TECH NOTE: Compatible with 0-1.5" of rear lift over stock
Application Summary:
| Year |
Make/Model |
| 2005-2023 |
Toyota Tacoma |
This item is a component of the following packages: K53007, K53007T
| Attributes |
| AAP_UDA_12 |
EA |
| AAP_UDA_22 |
1 |
| AAP_UDA_4 |
55 |
| Add-On Part |
252008 - 2.5 X 13 SHOCK BOOT BLACK (PAIR), 252012 - -4 TO -10 HOSE SHIELD KIT |
| Adjustable Damping |
Yes, Yes |
| Boot Included |
NO |
| Bore Diameter |
2.25 |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Cylinder Color |
Gray, Gray |
| Cylinder Diameter |
2.5, 2.5 |
| Cylinder Material |
Aluminum, Aluminum |
| Damping Adjustment Type |
Manual, Manual |
| Damping Type |
Oil, Oil |
| External Reservoir |
Yes, Yes |
| GTIN |
00840103404769 |
| Gas Charged |
Yes |
| Grade Type |
Performance |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| Lower Mount Type |
EYELET |
| Mounting Hardware Included |
Yes |
| NAFTA Preference Criterion Code |
C |
| SDR Required Flag |
N |
| Service Parts |
252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT, 611006 - 9/16 HD STEM BUSHING KIT |
| Shaft Diameter |
0.875, 0.875 |
| Shaft Material |
Chrome, Chrome |
| Shock Absorber Body End Measuring Point |
Shoulder of Stem |
| Shock Absorber Rod End Measuring Point |
Center of Eylet |
| Tube Outside Diameter |
2.5 |
| Upper Mount Type |
Stem |
| Warranty Time |
1 |
