ICON VS 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. They feature remote reservoirs, damping adjustability, and are 100% rebuildable/revalveable.
ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges.
- Nitrogen charged monotube design with remote reservoir
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- PTFE lined spherical bearings and application specific mounting hardware
- 100% Rebuildable
- 100% Revalveable
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
- ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
- 6061 aircraft grade aluminum CNC machined components
- One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
Information:
APPLICATION NOTE #185: Will not fit 2WD Tacoma with 5 wheel lug studs
Application Summary:
| Year |
Make/Model |
| 2003-2009 |
Lexus GX470 |
| 2003-2024 |
Toyota 4Runner |
| 2007-2014 |
Toyota FJ Cruiser |
| 2005-2023 |
Toyota Tacoma |
| Attributes |
| AAP_UDA_12 |
EA |
| AAP_UDA_22 |
1 |
| AAP_UDA_4 |
55 |
| Active or Passive Suspension |
Passive |
| Add-On Part |
252008 - 2.5 X 13 SHOCK BOOT BLACK (PAIR), 252012 - -4 TO -10 HOSE SHIELD KIT |
| Adjustable |
Yes, Yes |
| Adjustable Compression |
Yes |
| Adjustable Damping |
Yes, Yes |
| Adjustable Rebound |
No |
| Boot Included |
NO, NO |
| Bore Diameter |
2.25, 2.25 |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Compressed Length |
16.05 |
| Country of Origin (Primary) |
US |
| Cylinder Color |
Grey, Grey |
| Cylinder Diameter |
2.5, 2.5 |
| Cylinder Material |
Steel, Aluminum |
| Damping Adjustment Type |
Manual, Manual |
| Damping Type |
Oil, Oil |
| Extended Length |
23.88 |
| External Reservoir |
Yes, Yes |
| Gas Charged |
Yes, Yes |
| Grade Type |
Performance, Performance |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| Lower Mount Type |
EYELET, EYELET |
| Mounting Hardware Included |
Yes, Yes |
| NAFTA Preference Criterion Code |
C |
| Reservoir Type |
Remote |
| SDR Required Flag |
N |
| Service Parts |
252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT, 257339 - 7/8 SHAFT 13.25 OAL, 9.00 TRAVEL |
| Shaft Diameter |
0.875, 0.875 |
| Shaft Material |
Chrome, Chrome |
| Shock Absorber Body End Measuring Point |
Center of Eylet, Center of Eylet |
| Shock Absorber Rod End Measuring Point |
Center of Eylet, Center of Eylet |
| Stroke Length Front |
7.83 |
| Tube Outside Diameter |
2.5, 2.5 |
| Upper Mount Type |
EYELET, EYELET |
| Valving Type |
Digressive |
| Warranty Time |
1 |
| GTIN |
00840103404691 |
