ICON VS 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. They feature remote reservoirs, damping adjustability, and are 100% rebuildable/revalveable.
ICON Vehicle Specific (V.S.) 2.5 Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. If you are looking for a more user defined tune, consider looking into the Compression Damping Control Valve (CDCV) or the Omega Series bypass shocks.
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
- 7/8” diameter induction hardened, chrome plated shock shaft
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- Nitrogen charged monotube design with remote reservoir
- 6061 aircraft grade aluminum CNC machined components
- 100% Rebuildable
- 100% Revalveable
- One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- All ICON 2.5 Series Piggyback and Remote Reservoir shocks can be upgraded to ICON’s Compression Damping Control Valve (CDCV)
- PTFE lined spherical bearings and application specific mounting hardware
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
Information:
APPLICATION NOTE #256: Will not fit ICON S2 Secondary Shock System or any other stock width control arm kits with secondary shock compatibility
Application Summary:
| Year |
Make/Model |
| 2003-2024 |
Toyota 4Runner |
| 2007-2014 |
Toyota FJ Cruiser |
| 2005-2023 |
Toyota Tacoma |
| Attributes |
| AAP_UDA_12 |
EA |
| AAP_UDA_22 |
1 |
| AAP_UDA_4 |
55 |
| Active or Passive Suspension |
Passive |
| Add-On Part |
252008 - 2.5 X 13 SHOCK BOOT BLACK (PAIR), 252012 - -4 TO -10 HOSE SHIELD KIT |
| Adjustable |
No, No |
| Adjustable Compression |
No |
| Adjustable Damping |
No, No |
| Adjustable Rebound |
No |
| Boot Included |
NO, NO |
| Bore Diameter |
2.25, 2.25 |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Compressed Length |
15.03 |
| Country of Origin (Primary) |
US |
| Cylinder Color |
Grey, Grey |
| Cylinder Diameter |
2.5, 2.5 |
| Cylinder Material |
Steel, Aluminum |
| Damping Type |
Oil, Oil |
| Extended Length |
24.36 |
| External Reservoir |
Yes, Yes |
| Gas Charged |
Yes, Yes |
| Grade Type |
Performance, Performance |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| Lower Mount Type |
EYELET, EYELET |
| Mounting Hardware Included |
Yes, Yes |
| NAFTA Preference Criterion Code |
C |
| Reservoir Type |
Remote |
| SDR Required Flag |
N |
| Service Parts |
252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT, 257339 - 7/8 SHAFT 13.25 OAL, 9.00 TRAVEL |
| Shaft Diameter |
0.875, 0.875 |
| Shaft Material |
Chrome, Chrome |
| Shock Absorber Body End Measuring Point |
Center of Eylet, Center of Eylet |
| Shock Absorber Rod End Measuring Point |
Center of Eylet, Center of Eylet |
| Stroke Length Front |
9.33 |
| Tube Outside Diameter |
2.5, 2.5 |
| Upper Mount Type |
EYELET, EYELET |
| Valving Type |
Digressive |
| Warranty Time |
1 |
| GTIN |
00840103404653 |
