ICON 2.5 Series front coilover shocks are an incredible upgrade for the 4th gen Toyota Tacoma. These adjustable coilovers allow up 1.25-3” of lift with vehicle-specific shock length and valving for superior ride quality and performance.
ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir front coilover shocks are an incredible upgrade for the front end of the 2024-2025 Toyota Tacoma. These adjustable coilovers allow up 1.25-3” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving, their large 2.5” shock body with increased piston surface area over stock components, and their pairing with an ICON front differential drop (4WD only), yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade. ICON's exclusive Compression Damping Control Valves are included for precisely dialing in your suspension performance. CDCV controls fluid flow under compression, allowing you to achieve the perfect tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. When paired with ICON 2.0 or 2.5 Aluminum Series rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tacoma.
- Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Vehicle specific shock length and pairing with front differential drop yields maximum wheel travel
- Height-adjustable coilovers offer 1.25-3" of lift height adjustment over stock
- 2.5" diameter shock bodies with remote reservoirs
- Remote reservoirs maintain cooler operating temperatures during extended off-road use
- ICON CDCV equipped for 10 settings of external compression damping adjustment
- ICON engineered coil springs
Information:
APPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install
Application Summary:
| Year |
Make/Model |
| 2024-2025 |
Toyota Tacoma |
| Attributes |
| AAP_UDA_12 |
EA |
| AAP_UDA_22 |
1 |
| AAP_UDA_4 |
55 |
| Add-On Part |
58552DJ - 24 TACOMA BILLET UCA DJ PRO KIT, 58452DJ - 24 TACOMA TUBULAR UCA DJ PRO KIT |
| Adjustable Dampening |
Yes |
| Adjustable Damping |
Yes |
| Adjustable Height |
Yes |
| Adjustable Rebound |
No |
| Body Diameter |
2.5 |
| Boot Included |
No |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Coil Over Springs Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Cylinder Color |
Silver |
| Cylinder Finish |
Cadmium Plated |
| Cylinder Material |
Steel |
| Damping Adjustment Type |
Manual, Manual |
| Damping Type |
Oil, Oil |
| Dust Shield |
No |
| Dust Shield Included |
No |
| GTIN |
00840103428901 |
| Gas Charged |
Yes |
| Grade Type |
Performance |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Internal Construction Type |
Single Tube |
| Life Cycle Status Code |
Available to Order |
| Lower Mount Type |
Eyelet |
| Material |
Steel, Aluminum |
| Maximum Lift |
3, 3 |
| Minimum Lift |
1.25, 1.25 |
| NAFTA Preference Criterion Code |
C |
| OEM Wheels & Tires Fitment |
Yes, Yes |
| Recommended Aftermarket Tires |
33" x 12.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required), 33" x 12.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required) |
| Recommended Aftermarket Wheels |
ICON Alloys - 18x9 with 6.00” Backspace / 25mm Offset, ICON Alloys - 17x8.5 with 5.75” Backspace / 25mm Offset |
| Remote Reservoir |
Yes |
| Reservoir Style |
Remote |
| SDR Required Flag |
N |
| Shaft Diameter |
0.875, 0.875 |
| Shock Absorber Body End Measuring Point |
Top of Upper Mount Plate |
| Shock Absorber Rod End Measuring Point |
Center of Eyelet |
| Spring Color |
Black, Black |
| Spring Material |
Steel, Steel |
| Spring Rate Type |
Linear, Linear |
| Upper Mount Type |
Mounting Plate |
