ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road.
ICON Vehicle Dynamics V.S. 2.5 Series internal reservoir front coilover shocks are an incredible upgrade for the front end of the 2022-2025 Toyota Tundra and 2023-2025 Toyota Sequoia. These adjustable coilovers allow up to 1.25-3.5” of lift height adjustability on a Tundra or 3-4.5" of lift height adjustability on a Sequoia, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving along with the larger 2.5” shock body and increased piston area over stock components yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. When paired with ICON 2.0 or 2.5 Aluminum Series rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tundra or Sequoia.
- Increased wheel travel and improved ride quality over stock
- Vehicle specific tuned for superior shock damping and control
- Adjustable ride height offers 1.25-3.5" of front lift over stock on Tundra or 3-4.5" of front lift over stock on Sequoia
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8" diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
Information:
TECH NOTE: Most Sequoia sub-models will have front lift height range of 3-4.5" over stock. Submodels equipped with TRD Off-Road Package and TRD Pro will have front lift height range of 1-2.5" over stock.
Application Summary:
| Year |
Make/Model |
| 2023-2025 |
Toyota Sequoia |
| 2022-2025 |
Toyota Tundra |
| Attributes |
| AAP_UDA_12 |
EA |
| AAP_UDA_22 |
1 |
| AAP_UDA_4 |
55 |
| Add-On Part |
198000 - 2 PIN COILOVER SPANNER WRENCH KIT, 198001 - BILLET SPANNER WRENCH KIT |
| Adjustable Damping |
NO, NO |
| Adjustable Height |
Yes |
| Adjustable Rebound |
No |
| Body Diameter |
2.5 |
| Boot Included |
No |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Coil Over Springs Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Cylinder Color |
Silver |
| Cylinder Finish |
Cadmium Plated, Cadmium Plated |
| Cylinder Material |
Steel |
| Damping Type |
Oil, Oil |
| Dust Shield |
No, No |
| Dust Shield Included |
No |
| GTIN |
00840103414645 |
| Gas Charged |
Yes |
| Grade Type |
Performance, Performance |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Internal Construction Type |
Single Tube |
| Life Cycle Status Code |
Available to Order |
| Lower Mount Type |
Eyelet |
| Material |
Aluminum, Steel |
| Maximum Lift |
3.5, 3.5 |
| Minimum Lift |
1 |
| NAFTA Preference Criterion Code |
C |
| OEM Wheels & Tires Fitment |
Yes, Yes |
| Recommended Aftermarket Tires |
35" x 12.50" (Minor fender trimming and modifications may be required), 35" x 12.50" (Minor fender trimming and modifications may be required) |
| Recommended Aftermarket Wheels |
17x8.5" w/ 5.75” Backspace / 25mm Offset, 17x8.5" w/ 5.75” Backspace / 25mm Offset |
| Remote Reservoir |
NO, NO |
| Reservoir Style |
Internal, Internal |
| SDR Required Flag |
N |
| Service Parts |
252010 - 2.5 IFP REBUILD KIT, 252010 - 2.5 IFP REBUILD KIT |
| Shaft Diameter |
0.875, 0.875 |
| Shock Absorber Body End Measuring Point |
Top of Upper Mount Plate |
| Shock Absorber Rod End Measuring Point |
Center of Eylet |
| Spring Color |
Black, Black |
| Spring Material |
Steel, Steel |
| Spring Rate Type |
Linear, Linear |
| Upper Mount Type |
Mounting Plate |
| Warranty Time |
1 |
