These extended length ICON VS 2.5 Series coilovers offer increased wheel travel but also require the installation of aftermarket upper control arms. They are vehicle specific, 100% rebuildable, and 100% revalveable.
These extended length ICON VS 2.5 Series coilovers offer increased wheel travel but also require the installation of aftermarket upper control arms. They are vehicle specific, 100% rebuildable, and 100% revalveable.
- Adjustable coilovers yield 0-2.75" of front lift height
- Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
- Extended Travel length requires installation of aftermarket front upper control arms
- Superior low speed control reduces body roll and increases on-road stability
- High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage
- Corrosion resistant CAD plated shock body with 7/8" diameter shaft
- FK Rod End bearings provide extended longevity and minimal deflection
- Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
- Bolt-in design makes for an easy install into OEM shock location
Information:
TECH NOTE: 2017-UP Tacoma TRD Pro models will have front lift height range of 0-1.25" over stock
Application Summary:
| Year |
Make/Model |
| 2005-2023 |
Toyota Hilux |
| 2005-2023 |
Toyota Tacoma |
This item is a component of the following packages: K53003, K53003T
| Attributes |
| AAP_UDA_12 |
EA |
| AAP_UDA_22 |
1 |
| AAP_UDA_4 |
55 |
| Add-On Part |
198000 - 2 PIN COILOVER SPANNER WRENCH KIT, 198001 - BILLET SPANNER WRENCH KIT |
| Adjustable Damping |
NO |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Coil Over Springs Included |
Yes |
| Country of Origin (Primary) |
US |
| Damping Type |
Oil |
| Dust Shield |
No |
| GTIN |
00840103403922 |
| Grade Type |
Performance |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminum |
| NAFTA Preference Criterion Code |
C |
| OEM Wheels & Tires Fitment |
Yes |
| Recommended Aftermarket Tires |
33" x 11.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required) |
| Recommended Aftermarket Wheels |
ICON Alloys |
| Remote Reservoir |
NO |
| SDR Required Flag |
N |
| Service Parts |
252010 - 2.5 IFP REBUILD KIT, 611067 - TACOMA/FJ/4RNR LOWER CO BRG/SPCR KIT |
| Shaft Diameter |
0.875 |
| Spring Color |
Black |
| Spring Material |
Steel |
| Spring Rate |
650 |
| Warranty Time |
1 |
