ICON V.S. 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. They feature remote reservoirs and are 100% rebuildable/revalveable.
ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are fully rebuildable and re-tunable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061-billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. If you are looking for a more user defined tune, consider ICON compression adjustable shock absorbers equipped with CDCV, CDXS, or CDEV.
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- All ICON 2.5 Aluminum Series Remote Reservoir shocks can be upgraded with an ICON compression adjuster (CDCV, CDXS, or CDEV)
- 7/8” diameter induction hardened, chrome plated shock shaft
- Rubber dust boot included for added shaft protection
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- Fully rebuildable and re-tunable
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
- One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
Information:
TECH NOTE: Compatible with 0-3” of rear lift over stock
Application Summary:
| Year |
Make/Model |
| 2024-2025 |
Lexus GX550 |
| 2024-2025 |
Toyota Land Cruiser |
| Attributes |
| Active or Passive Suspension |
Passive |
| Add-On Part |
252012 - -4 TO -10 HOSE SHIELD KIT, 252012 - -4 TO -10 HOSE SHIELD KIT |
| Adjustable |
No, No |
| Adjustable Compression |
No, No |
| Adjustable Damping |
No, No |
| Adjustable Rebound |
No, No |
| Boot Included |
Yes, Yes |
| Bore Diameter |
2.25, 2.25 |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Cylinder Color |
Gray, Gray |
| Cylinder Diameter |
2.5, 2.5 |
| Cylinder Material |
Aluminum, Aluminum |
| Damping Type |
Oil, Oil |
| External Reservoir |
Yes, Yes |
| GTIN |
00840103430515 |
| Gas Charged |
Yes, Yes |
| Grade Type |
Performance, Performance |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| Lower Mount Type |
Eyelet, Eyelet |
| Mounting Hardware Included |
Yes, Yes |
| NAFTA Preference Criterion Code |
C |
| Reservoir Type |
Remote |
| SDR Required Flag |
N |
| Service Parts |
252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT, 252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT |
| Shaft Diameter |
0.875, 0.875 |
| Shaft Material |
Chrome, Chrome |
| Shock Absorber Body End Measuring Point |
Shoulder of Stem, Shoulder of Stem |
| Shock Absorber Rod End Measuring Point |
Center of Eylet, Center of Eylet |
| Tube Outside Diameter |
2.5, 2.5 |
| Upper Mount Type |
Stem, Stem |
| Valving Type |
Digressive, Digressive |
| Warranty Time |
1 |
