ICON 2.5 Aluminum Series shocks with CDEV are designed to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.
Compression Damping Electronic Valve (CDEV) is an electronically controlled valve that meters the flow of oil to regulate the amount of damping force that is created by the shock when compressed. This infinitely variable valve can react in less than 40ms and has the ability to make extremely precise adjustments for varying terrain. CDEV’s hydraulic circuits are also custom tailored per application to create the highest resolution and dynamic range allowable for each specific vehicle. Powered by ICON Intelligent Control and proprietary ICON mobile app, the system uses information from the onboard G-force sensor and Gyroscope to perform calculations based on algorithms and user-defined settings to predict terrain and adjust shock settings via the CDEV accordingly.
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with piggyback reservoir
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- 100% Rebuildable
- 100% Revalveable
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- ICON exclusive side mounted "RXT" rod ends allow for increased shaft travel and compatibility with vehicle's stock shock mounting points
- One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
Information:
TECH NOTE: Compatible with 0-2.625" of rear lift provided by ICON Multi-Rate Leaf Springs
Application Summary:
| Year |
Make/Model |
| 2005-2023 |
Toyota Tacoma |
| Attributes |
| AAP_UDA_12 |
EA |
| AAP_UDA_22 |
1 |
| AAP_UDA_4 |
55 |
| Active or Passive Suspension |
Active |
| Add-On Part |
252012 - -4 TO -10 HOSE SHIELD KIT, 53502 - 16-UP TACOMA IIC INSTALL KIT |
| Adjustable |
Electronically, Electronically |
| Adjustable Compression |
Yes |
| Adjustable Damping |
Yes |
| Adjustable Rebound |
No |
| Boot Included |
NO, NO |
| Bore Diameter |
2.25, 2.25 |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Compressed Length |
14.87 |
| Country of Origin (Primary) |
US |
| Cylinder Color |
Grey, Grey |
| Cylinder Diameter |
2.5 |
| Cylinder Material |
Aluminum, Aluminum |
| Damping Adjustment Type |
Electronic |
| Damping Type |
Oil, Oil |
| Extended Length |
25.2 |
| External Reservoir |
Yes, Yes |
| Gas Charged |
Yes, Yes |
| Grade Type |
Performance, Performance |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| Lower Mount Type |
EYELET, EYELET |
| Mounting Hardware Included |
Yes, Yes |
| NAFTA Preference Criterion Code |
C |
| Reservoir Type |
Remote |
| SDR Required Flag |
N |
| Service Parts |
252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT, 611008 - 9/16 RXT HEAVY DUTY STEM BUSHING KIT |
| Shaft Diameter |
0.875, 0.875 |
| Shaft Material |
Chrome, Chrome |
| Shock Absorber Body End Measuring Point |
Shoulder of Stem, Shoulder of Stem |
| Shock Absorber Rod End Measuring Point |
Center of Eylet, Center of Eylet |
| Stroke Length Rear |
10.33 |
| Tube Outside Diameter |
2.5, 2.5 |
| Upper Mount Type |
Stem, Stem |
| Valving Type |
Digressive |
| Warranty Time |
1 |
| GTIN |
00840103411675 |
