This IVD Leveling Suspension Leveling Spacer Kit was designed to bring the front end of your 2005-2023 Tacoma, 2007-2014 FJ Cruiser, 2003-2024 4Runner to a more level stance with the rear of the vehicle.
Ready to Lift your 2005-UP Toyota Tacoma Prerunner 2WD/4WD truck, but need something a little more affordable then the higher end suspension shock systems or lift kits that are available? This IVD Leveling Suspension Leveling Spacer Kit was designed to bring the front end of your 2005-UP Tacoma, 2007-2014 FJ Cruiser, or 2003-UP 4Runner to a more level stance with the rear of the vehicle. Installing a set of our IVD Leveling fabricated steel spacers will also allow for installation of 32 inch tall tires with proper clearance. Our 2 inch Lift Steel Leveling Spacer bolt in on top of the factory strut making for a simple and quick install. IVD Leveling Spacer kits for the Toyota Tacoma trucks were designed to work within the factory suspension parameters giving you a simple leveling kit with out extensive modifications required, at an affordable price.
- Quality Steel Construction
- Affordable Leveling Lift Kit
- 2" Front Lift Height for a More Level Stance
- Lifetime Warranty on all IVD Leveling Suspension Components
Information:
TECH NOTE: Will not fit Tacoma TRD Pro or 4Runner TRD Pro
Application Summary:
| Year |
Make/Model |
| 2003-2018 |
Toyota 4Runner |
| 2020-2023 |
Toyota 4Runner |
| 2007-2014 |
Toyota FJ Cruiser |
| 2005-2023 |
Toyota Tacoma |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| GTIN |
00840103408125 |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| NAFTA Preference Criterion Code |
C |
| OEM Wheels & Tires Fitment |
Yes |
| Recommended Aftermarket Tires |
32" x 11.50" (Larger Tires May Fit but Fender Trimming and Modifications will be Required) |
| Recommended Aftermarket Wheels |
ICON Alloys - 17x8.5 w/ 4.75" Backspace / 0mm Offset, ICON Alloys - 18x9 w/ 5" Backspace / 0mm Offset |
| SDR Required Flag |
N |
