Fits 2014-2015 Chevrolet Camaro SS with a 6.2L V8 engine, fits hard top and convertible models
Flowmaster's Outlaw Axle-back exhaust system for the 2014-2015 Chevrolet Camaro SS Coupe and Convertible is perfect for the person looking for a very aggressive exhaust tone inside and outside the vehicle, with all of the performance benefits that you would expect from Flowmaster. This easy to bolt-on emissions-legal system for the 6.2L V8 features a pair of stainless steel Outlaw Series mufflers with 2.50" stainless steel mandrel bent pipes. The system finishes off with polished 4.00" stainless steel tips. This system does not fit models with the "Dual Mode Exhaust" option. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. The exhaust system is covered by Flowmaster's Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation.
- Dyno Tuned For Maximum Performance
- Race Proven Design
- Lifetime Limited Warranty
- Stainless Steel Construction
Information:
Does not fit models with Dual Mode Exhaust option.
Application Summary:
| Year |
Make/Model |
| 2014-2015 |
Chevrolet Camaro |
| Attributes |
| 2WD/4WD |
RWD, 2WD |
| ASIN |
B00GBSWMR4 |
| Brand |
Flowmaster |
| Bullet Point #1 |
Stainless Steel Construction |
| Bullet Point #2 |
Dyno Tuned For Maximum Performance |
| Bullet Point #3 |
Race Proven Design |
| Bullet Point #4 |
Lifetime Limited Warranty |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
Outlaw |
| Exhaust Tip Length |
5.25 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042030590 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Inside Diameter (in.) |
2.5 |
| Inlet Size (in.) |
2.5 |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler (Left) Body Height |
4.50 |
| Muffler (Left) Body Length |
11.00 |
| Muffler (Left) Body Width |
4.50 |
| Muffler (Right) Body Height |
4.50 |
| Muffler (Right) Body Length |
11.00 |
| Muffler (Right) Body Width |
4.50 |
| Muffler Body Diameter |
4.50 |
| Muffler Body Height |
4.50 |
| Muffler Body Width |
4.50 |
| Muffler Count |
2 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
Outlaw |
| Muffler Type |
Straight-Through |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Outlaw Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Aggressive |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
Axle Back, Axle-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
3.00 |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Diameter (in.) |
4 |
| Tip Length |
5.250 in., 5.25 |
| Tip Length (in) |
5.25 |
| Tip Length (in.) |
5.25 |
| Tip Quantity |
2 |
| Tip Size |
4.0 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Type |
Axle-Back |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
