2013-2014 Ford Mustang GT 5.0L Coupes & Convertibles. - Aggressive sound
The Flowmaster® American Thunder® Axle-back exhaust system for the 2013-2014 Ford Mustang GT is perfect for the person looking for an aggressive sound level outside of the car with a moderate interior tone at different rpms. This bolt-on emissions-legal system is for cars with the 5.0L engine and features 3.00-inch mandrel-bent tubing flowing into a pair of Super 44™ Series performance mufflers with 3.00-inch tailpipes for maximum performance and a deep powerful sound. The system is constructed from 409 stainless steel, uses the factory hanger locations and features large 4.00-inch polished stainless steel tips for a refined look. The system is covered by our Flowmaster Lifetime Limited Warranty and is designed for an easy fit and includes all necessary parts and hardware for installation. Note: This system fits coupes and convertibles.
- Large 4.00-inch Polished Stainless Steel Tips
- Dyno Tuned For Maximum Performance
- Large 3.00-inch Mandrel-bent Tubing
- Uses the Factory Hanger Locations
- Super 44 Performance Mufflers
- Stainless Steel Construction
- Quick and Easy Installation
- Lifetime Limited Warranty
Information:
Fits 2013-2014 Ford Mustang GT 5.0L Coupes & Convertibles.
Application Summary:
| Year |
Make/Model |
| 2013-2014 |
Ford Mustang |
| Attributes |
| 2WD/4WD |
RWD, 2WD |
| ASIN |
B0094G18ZW |
| Brand |
Flowmaster |
| Bullet Point #1 |
Stainless Steel Construction |
| Bullet Point #2 |
Dyno tuned for maximum performance |
| Bullet Point #3 |
Patented Delta Flow technology |
| Bullet Point #4 |
Premium Quality |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
American Thunder |
| Exhaust Tip Length |
5.25 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042027576 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.750 in., 2.75 |
| Inlet Diameter (in) |
2.75 |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
3 |
| Inlet Size (in.) |
3 |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler (Left) Body Height |
4.00 |
| Muffler (Left) Body Length |
13.25 |
| Muffler (Left) Body Width |
9.50 |
| Muffler (Right) Body Height |
4.00 |
| Muffler (Right) Body Length |
13.25 |
| Muffler (Right) Body Width |
9.50 |
| Muffler Body Height |
4.00 |
| Muffler Body Width |
9.50 |
| Muffler Count |
2 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
Super 44 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
4.000 in. |
| Outlet Outside Diameter (in.) |
4 |
| Outlet Size (in.) |
4 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Aggressive |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
Axle Back, Axle-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00 |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Diameter (in.) |
4 |
| Tip Quantity |
2 |
| Tip Size |
4.0 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Type |
Axle-Back |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
