2011-2012 Ford Mustang GT 5.0L Coupes & Convertibles. Does Not Fit GT500. - Aggressive sound
Flowmaster® proudly introduces our newest cat-back exhaust system for 2011-2012 Mustang GT with the 5.0L engine. Designed for the hard core enthusiast, the Outlaw Series mufflers deliver a very aggressive exterior tone, along with an aggressive interior sound as well. The system features dual 3.00-inch mandrel-bent stainless steel tubing, our exclusive Scavenger Series® X-pipe for maximum power and a unique deep tone and includes a pair of our race-proven Outlaw® mufflers. The large 3.00-inch mandrel-bent tailpipes use the factory hanger locations are finished off with 4.00-inch polished 304 stainless steel tips. Includes all necessary parts, hardware and detailed instructions for an easy installation you can do at home. Covered by our Lifetime Limited Warranty. Note: Does Not Fit GT500.
- Large 3.00-inch Mandrel-bent Tubing
- Uses the Factory Hanger Locations
- Dyno Proven Performance Gains
- Race-proven Outlaw Mufflers
- Stainless Steel Construction
- Lifetime Limited Warranty
- Super Aggressive Sound
Information:
Fits 2011-2012 Ford Mustang GT 5.0L Coupes & Convertibles. Does Not Fit GT500.
Application Summary:
| Year |
Make/Model |
| 2011-2012 |
Ford Mustang |
| Attributes |
| 2WD/4WD |
2WD |
| ASIN |
B0081XCD8U |
| Brand |
Flowmaster |
| Bullet Point #1 |
Stainless Steel Construction |
| Bullet Point #2 |
Dyno proven performance gains |
| Bullet Point #3 |
Super Aggressive Sound |
| Bullet Point #4 |
Lifetime limited warranty |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
Outlaw |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Length |
5.25 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042026487 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
3 |
| Inlet Size (in.) |
3 |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler (Left) Body Height |
4.00 |
| Muffler (Left) Body Length |
10.50 |
| Muffler (Left) Body Width |
4.00 |
| Muffler (Right) Body Height |
4.00 |
| Muffler (Right) Body Length |
10.50 |
| Muffler (Right) Body Width |
4.00 |
| Muffler Body Diameter |
4.00 |
| Muffler Body Height |
4.00 |
| Muffler Body Length |
10.50 |
| Muffler Body Width |
4.00 |
| Muffler Count |
2 |
| Muffler Inlet Inside Diameter |
3.00 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
Outlaw Delta Force, Outlaw |
| Muffler Type |
Straight-Through |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
4.000 in. |
| Outlet Outside Diameter (in.) |
4 |
| Outlet Size (in.) |
4 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Outlaw Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Aggressive |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00 |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Diameter (in.) |
4 |
| Tip Quantity |
2 |
| Tip Size |
4.0 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
