Fits 2005-2012 Toyota Tacoma with 4.0L engine, American Thunder, stainless steel, dual exit exhaust system. - Aggressive to moderate sound
This American Thunder® Cat-back system is designed for the 2005-2012 Toyota Tacoma with 4.0L engine. The system is constructed entirely of 409S stainless steel for long-lasting durability. The 2.50-inch mandrel bent system connects to the back of the factory catalytic converter assembly using the supplied flanged inlet pipe. It then flows into a Super 50™ Series performance muffler and exits into dual 2.50-inch stainless steel tailpipes, which exit on both sides of the vehicle behind the rear tires. The tailpipes are finished off with large 3.00-inch polished stainless tips embossed with the Flowmaster® logo. As an American Thunder system, it provides improved horsepower and torque along with a moderate performance sound level both inside and outside of the vehicle. Includes instructions and all necessary hardware for an easy bolt-on installation you can do at home and is covered by our Lifetime Limited Warranty. Note: Does NOT fit standard cab or X-Runner models.
- Includes all Necessary Parts and Detailed Instructions
- Stainless Steel Construction
- Lifetime Limited Warranty
- Delta Flow Technology
- Easy Installation
- Attaches Directly to Factory Catalytic Convertor
- Dual 3.00-inch Polished Stainless Steel Tips
- Dyno Tuned For Maximum Performance
- Super 50 Series Performance Muffler
- Uses the Factory Hanger Locations
- Clears the Factory Spare Tire
Information:
Fits 2005-2012 Toyota Tacoma with 4.0L engine, fits 2/4 wheel drive models. Does not fit standard cab or X-Runner models.
Application Summary:
| Year |
Make/Model |
| 2005-2012 |
Toyota Tacoma |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B003BZ9LNI |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Clearance Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Discount Percentage |
26-50% |
| Emission Code |
5 |
| Exhaust Series |
American Thunder |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Length |
13.00 |
| Exhaust Type |
Single |
| Exit Position |
Dual Side, Dual Side Exit |
| Exit Style |
Straight |
| GTIN |
00700042023813 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Inside Diameter (in.) |
2.5 |
| Inlet Size (in.) |
2.5 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler Body Height |
5.00 |
| Muffler Body Length |
17.25 |
| Muffler Body Width |
10.00 |
| Muffler Count |
1 |
| Muffler Inlet Inside Diameter |
2.50 |
| Muffler Inlet Outside Diameter |
2.63 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
1 |
| Muffler Series |
Super 50 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Sale Category |
Exhaust |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate/Aggressive, Aggressive / Moderate |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Diameter (in) |
3 |
| Tip Diameter (in.) |
3 |
| Tip Quantity |
2 |
| Tip Size |
3 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
