2004-2008 Ford F-150 and Lincoln Mark LT truck with 4.6L, 5.4L engine. - Aggressive to moderate sound
This Flowmaster American Thunder® cat-back exhaust system for the 2004-2008 Ford F-150 and Lincoln Mark LT trucks with the 4.6L or 5.4L engines, is perfect for the person looking for a deep aggressive exterior sound with a moderate interior tone, and with all of the performance benefits that you would expect from Flowmaster®. This bolt-on DOR/DOS (Dual Out Rear or Dual Out Side) emissions-legal exhaust system features 16-gauge mandrel-bent stainless steel tubing flowing into a specially designed Super 40™ Series performance muffler with dual 2.50-inch stainless steel tailpipes which use the factory hanger locations for an easy installation. The tailpipes exit either behind the rear wheels, which is ideal for towing, or straight out the back under the rear bumper for a muscular look. The system is finished off with a pair of large 3.00-inch polished stainless steel tips. The exhaust system is covered by our Lifetime Limited Warranty and includes all necessary parts and hardware for an easy installation you can do at home. For those who prefer all aluminized steel construction with a 3-year Limited Warranty, check out exhaust system #17417. Note: Fits 2/4 wheel drive models all wheelbases.
- Features a Specially Designed Super 40 Series Performance Muffler
- Lifetime Limited Warranty
- Easy Installation
- Includes Hangers and Hardware for an Easy Installation
- Mandrel bent 16-gauge Aluminized Steel Tubing
- Dual 3.00-inch Polished Stainless Steel Tips
- Dyno Tuned for Maximum Performance
- Moderately Aggressive Exterior Sound
- Uses the Factory Hanger Locations
- Includes Dual Tailpipe Exits
Information:
Fits 2004-2008 Ford F-150 and Lincoln Mark LT truck with 4.6L or 5.4L engine, fits 2/4 wheel drive models and all wheelbases.
Application Summary:
| Year |
Make/Model |
| 2004-2008 |
Ford F-150 |
| 2004 |
Ford F-150 Heritage |
| 2006-2008 |
Lincoln Mark LT |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B003LQN6JM |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
American Thunder |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Type |
Single |
| Exit Position |
Dual Rear Same Side, Dual Out Rear / Dual Out Side |
| Exit Style |
Straight |
| GTIN |
00700042023905 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler Count |
1 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
1 |
| Muffler Series |
Super 40 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate, Aggressive / Moderate |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Diameter (in) |
3 |
| Tip Diameter (in.) |
3 |
| Tip Quantity |
2 |
| Tip Size |
3 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Warning |
California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit |
