1986-1993 Ford Mustang LX with 5.0L engine. Fits coupes and convertibles. Also fits 1986 Ford Mustang GT with 5.0L engine. - Aggressive sound
Our American Thunder® exhaust system for 1986-1993 Ford Mustang LX (Fox body) with the 5.0L engine is a bolt-on emissions legal system. Features free-flowing 2.50-inch mandrel-bent stainless steel inlet pipes flowing into a pair of Super 44® Series mufflers for that deep iconic sound of the 5.0L engine. The 2.50-inch mandrel-bent stainless steel tailpipes use the factory hanger locations for a quick and easy installation and the system is finished off with a pair of long 2.50-inch 304 stainless steel tips for that show car look. Includes all necessary parts, hardware and easy to follow instructions and is covered by our Lifetime Limited Warranty. Note: Fits coupes and convertibles. Also fits 1986 Ford Mustang GT models with 5.0L engine
- Includes Hangers and Hardware for Easy Installation
- Mandrel-bent 16-gauge Stainless Steel Tubing
- Aggressive Sound Exterior Exhaust Tone
- Dyno Tuned for Maximum Performance
- Super 44 Series Performance Mufflers
- Uses the Factory Hanger Locations
- 304 Stainless Steel Tailpipes
- Lifetime Limited Warranty
- Easy Installation
Information:
Fits 1986-1993 Ford Mustang LX with 5.0L engine. Fits coupes and convertibles. Also fits 1986 Ford Mustang GT with 5.0L engine.
Application Summary:
Year |
Make/Model |
1986-1993 |
Ford Mustang |
Attributes |
2WD/4WD |
2WD |
ASIN |
B0035J8352 |
Brand |
Flowmaster |
Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
Bullet Point #2 |
Aggressive Sound Exterior Exhaust Tone |
Bullet Point #3 |
Includes hangers and hardware for easy installation |
Bullet Point #4 |
Dyno tuned for maximum performance |
California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Catalytic Converter Quantity |
Not Included |
Category |
Exhaust |
Country of Origin (Primary) |
CN |
Emission Code |
5 |
Exhaust Series |
American Thunder |
Exhaust System Kit Type |
Cat-Back |
Exhaust Tip Length |
24.50 |
Exhaust Type |
Dual |
Exit Position |
Dual Rear, Dual Out Rear |
Exit Style |
Straight |
GTIN |
00700042022427 |
Harmonized Tariff Code (Schedule B) |
8708925000 |
Hazardous Material Code |
N |
Heat Shield |
No |
Heat Shield Attached |
No |
Inlet Diameter |
2.500 in., 2.50 |
Inlet Diameter (in) |
2.5 |
Inlet Inside Diameter |
N/A |
Inlet Inside Diameter (in.) |
N/A |
Inlet Size (in.) |
N/A |
Life Cycle Status Code |
Available to Order |
Main Piping Diameter |
2-1/2 |
Material |
Stainless Steel, 409 Stainless Steel |
Muffler (Left) Body Height |
4.00 |
Muffler (Left) Body Length |
13.25 |
Muffler (Left) Body Width |
9.50 |
Muffler (Right) Body Height |
4.00 |
Muffler (Right) Body Length |
13.25 |
Muffler (Right) Body Width |
9.50 |
Muffler Body Height |
4.00 |
Muffler Body Length |
13.25 |
Muffler Body Width |
9.50 |
Muffler Count |
2 |
Muffler Inlet Inside Diameter |
2.50 |
Muffler Inlet Outside Diameter |
2.63 |
Muffler Part Number |
Kit Only |
Muffler Quantity |
2 |
Muffler Series |
Super 44 Series |
Muffler Type |
Chambered |
NAFTA Preference Criterion Code |
B |
Outlet Diameter |
2.500 in., 2.50 |
Outlet Diameter (in) |
2.5 |
Outlet Outside Diameter |
2.500 in. |
Outlet Outside Diameter (in.) |
2.5 |
Outlet Size (in.) |
2.5 |
Product Type |
Exhaust Systems / Kits, Exhaust System |
SDR Required Flag |
N |
SDS Sheet Number |
N |
Sale Category |
Exhaust |
Series |
American Thunder Exhaust Systems |
Single Dual |
Dual |
Single or Dual |
Dual |
Sound Level |
Aggressive |
Sub Category |
Exhaust and Tail Pipes |
Subcategory |
Cat-Back Exhaust Kits |
System Type |
Cat Back, Cat-back |
Tail Pipe Diameter |
2.500 in. |
Tail Pipe Outlet Outside Diameter |
2.50 |
Tip Diameter |
2.500 in., 2.50 |
Tip Diameter (in) |
2.5 |
Tip Diameter (in.) |
2.5 |
Tip Quantity |
2 |
Tip Size |
2.5 in. |
Tubing Diameter |
2.500 in., 2.50 |
Tubing Diameter (IN) |
2.5 |
Warning |
California Proposition 65 |
Warranty Time |
12 |
part type |
Exhaust System Kit |