1998-2003 Ford F-150 truck with 4.6L or 5.4L engine. - Mild sound
For the person who wants the look of a traditional dual exhaust system with all the benefits that a Flowmaster® Cat-back exhaust system provides. The Force II system is constructed from mandrel-bent 2.50-inch aluminized steel flowing into a Super 50™ Series muffler for a moderate exterior tone and mild to moderate interior tone. The system finishes with dual 2.50-inch tailpipes and polished 3.00-inch stainless steel tips, and your choice of tailpipe exits either straight out the back for a muscular look, or exiting behind the rear wheels which is ideal for towing. The system uses the factory hanger locations for an easy installation and is covered by our 3-year Limited Warranty. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Comes with our 3-year Limited Warranty. For those who prefer full stainless steel construction and a Lifetime Limited Warranty, check out exhaust system part# 817472. Notes: Fits 2/4 wheel drive models and all wheelbases including Super Crew Cab.
- Includes Hangers and Hardware for an Easy Installation
- 3-year Limited Warranty
- Flowmaster Quality
- Mandrel-bent 16 Gauge Aluminized Steel Tubing
- Dyno Tuned for Maximum Performance
- Super 50 Series Performance Muffler
- Mild-Moderate Exterior Exhaust Tone
- Uses the Factory Hanger Locations
- Polished 304 Stainless Steel Tips
- Your Choice of Tailpipe Exits
Information:
Fits 1998-2003 Ford F-150 truck with 4.6L or 5.4L engine. Fits 2/4 wheel drive models and all wheelbases including Super Crew Cab.
Application Summary:
| Year |
Make/Model |
| 1998-2003 |
Ford F-150 |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B0035JHNSK |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Stock to mild exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
U-Bolt |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
Force II, Force II |
| Exhaust System Kit Type |
Cat-Back, Cat-Back |
| Exhaust Tip Length |
13.00 |
| Exhaust Type |
Single |
| Exit Position |
Dual Rear Same Side, Dual Split Side, Single Side |
| Exit Style |
Straight |
| GTIN |
00700042022380 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Inside Diameter (in.) |
2.5, N/A |
| Inlet Size (in.) |
2.5, N/A |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Aluminized Steel, Aluminized Steel |
| Muffler Body Height |
5.00 |
| Muffler Body Length |
17.00 |
| Muffler Body Width |
10.00 |
| Muffler Count |
1 |
| Muffler Inlet Inside Diameter |
2.50 |
| Muffler Inlet Outside Diameter |
2.63 |
| Muffler Part Number |
525561, 525561 |
| Muffler Quantity |
1 |
| Muffler Series |
Super 50 Series, Super 50 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Dual, Dual |
| Single or Dual |
Dual |
| Sound Level |
Mild, Mild |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Diameter (in) |
3 |
| Tip Diameter (in.) |
3 |
| Tip Quantity |
2, 2 |
| Tip Size |
3 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit |
