1994-1997 Ford F-250/F-350 trucks with a 5.8L or 7.5L engine using a 3-inch catalytic converter. - Mild sound
This Flowmaster Force II® cat-back exhaust system is custom designed for 1994-1997 Ford F-250/F-350 trucks with a 5.8L or 7.5L engine using a 3-inch catalytic converter and is perfect for the person looking for a mild to moderate sound level inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster®. This bolt-on emissions-legal system features a 3.00-inch mandrel-bent aluminized steel inlet pipe flowing into a 70 Series Big Block II™ muffler for a deep mellow tone. The single 3.00-inch aluminized steel mandrel-bent tailpipe is finished off with an angle cut turn down style tip behind the right rear wheel and uses the factory hanger locations. Also includes an aluminum heat shield with strap clamps to secure it to the muffler. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts and hardware for a quick and easy installation you can do at home. Notes: Fits 2/4 wheel drive models and all wheelbases including Crew Cab.
- Includes Aluminum Heat shield and Stainless Steel Clamps
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16 Gauge Aluminized Tubing
- 70 Series Big Block II Performance Muffler
- Mild to Moderate Exterior Exhaust Tone
- Dyno Tuned for Maximum Performance
- Uses the Factory Hanger Locations
- 3-year Limited Warranty
- Easy Installation
Information:
Fits 1994-1997 Ford F-250/F-350 trucks with a 5.8L or 7.5L engine using a 3-inch catalytic converter. Fits 2 and 4 wheel drive models and all wheelbases including Crew Cab.
Application Summary:
| Year |
Make/Model |
| 1994-1996 |
Ford F-250 |
| 1994-1997 |
Ford F-350 |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B000CNN0K2 |
| Brand |
Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Mild exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust |
| Clamping Type |
U-Bolt |
| Country of Origin (Primary) |
US |
| Emission Code |
5 |
| Exhaust Series |
Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Quantity |
Sold Separately |
| Exhaust Type |
Single |
| Exit Position |
Single Side, Single Side Exit |
| Exit Style |
Straight |
| GTIN |
00700042015122 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel |
| Muffler Body Height |
5.00 |
| Muffler Body Length |
10.00, 22.00 |
| Muffler Count |
1 |
| Muffler Part Number |
53073 |
| Muffler Quantity |
1 |
| Muffler Series |
70 Series Big Block |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Single |
| Single or Dual |
Single |
| Sound Level |
Mild |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00 |
| Tip Diameter |
N/A |
| Tip Quantity |
Not Included |
| Tip Size |
N/A |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit |
