1986-1993 Ford Mustang LX 5.0L engine and 1986 Mustang GT with 5.0L engine. - Aggressive sound
Our American Thunder® exhaust system for 1986-1993 Ford Mustang LX and 1986 GT models with the 5.0L engine is a bolt-on emissions legal system featuring free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes, aluminized steel tailpipes and uses the factory hanger locations for quick and easy installation. This Flowmaster® exhaust system features a pair of Super 44™ Series mufflers for maximum power and complements that iconic deep and powerful Fox body 5.0L engine sound. Includes all necessary hardware and easy to follow instructions. Note: Fits coupes and convertibles.
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16 Gauge Aluminized Steel Tubing
- Dyno-tuned for Maximum Performance
- Super 44 Series Performance Mufflers
- Uses the Factory Hanger Locations
- Moderate Exterior Exhaust Tone
- 3-year Limited Warranty
- Easy Installation
Information:
Fits 1986-1993 Ford Mustang LX with 5.0L engine and 1986 Mustang GT with 5.0L engine.
Application Summary:
| Year |
Make/Model |
| 1986-1993 |
Ford Mustang |
| Attributes |
| 2WD/4WD |
2WD, 2WD |
| ASIN |
B000CNJ7ZO |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Aggressive Sound Exterior Exhaust Tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| GTIN |
00700042010103 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Aluminized Steel, Aluminized Steel |
| Muffler Count |
2 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
Super 44 Series, Super 44 Series |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5, 3 |
| Outlet Size (in.) |
2.5, 3 |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual, Dual |
| Single or Dual |
Dual |
| Sound Level |
Aggressive, Aggressive |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tip Diameter |
N/A |
| Tip Quantity |
Not Included |
| Tip Size |
2.5 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Warranty Time |
36 |
| part type |
Exhaust System Kit |
