2022-2024 Toyota Tundra 4wd 7" Suspension Lift Kit 5" Rear Coil Spring - Fox 2.5 PES C/O Front Fox 2.0 PES Rear

---

This kit takes advantage of BDS's proven high-clearance architecture for improved ground clearance strength and off-road protection while correcting suspension and steering geometry for excellent on-roadhandling characteristics. Up front the kit pairs the FOX 2.5 PE Coil-Overs with high-arched 1/4-inch thick steel crossmembers properly relocating the front differential to correct CV operating angles and protecting itwith heavy-duty laser-cut skid plates featuring the iconic tri-color stripe backing plate. Steering geometry is corrected at the new taller ride height with CNC-machined ductile iron steering knuckles and high-strengthtie rod ends improving control and ESC system compatibility. These along with the provided sway bar drops bump stop extensions brake line brackets FOX reservoir mounts and hardware packs create acomprehensive front suspension lift ready for any challenge.In the rear the kit utilizes a pair of ProRide coil springs a track bar relocation bracket extended sway bar links and control arm brackets to lift and level the stance while maintaining suspension geometry and loadcapacity. For shocks you have the option of FOX 2.0 IFP Performance Series gas shocks or an upgrade to the FOX 2.5 Performance Elite (PE) series piggyback reservoir shocks to match the front and furtherenhance vehicle performance and adjustability.

• FOX 2.5 PerformanceElite series coilovers andchoice of FOX 2.0 or 2.5(PE) rear shocks forimproved ride quality performance andcapability
• High clearancecrossmember designmaximizes groundclearanceRobust steering knuckles andtie rod ends to maintain ESCsystem compliance
• Fullwidth mult-piece skid platesystem improved offroadprotection
• Progressive rate rear coil springsimprove ride quality load capacity andsuspension travel
• Factory ProtectionPlus drivetrainwarranty included

---

Information:

Wheel&Tire Combos were tested through normal driving conditions within alignment specs.Some models will required: removal of mud flaps fender liner being trimmed or resecured bodymount bump being cut off or ground down** Some 37" tires with 5-5.5" BS wheels may rub the sway bar during full lock turning situations