Upgrade the factory control arms on your 1997-2006 Jeep Wrangler TJ or 1993-1998 Grand Cherokee ZJ with BDS heavy-duty replacements. Designed as a bolt-in upgrade, BDS rear upper control arms add strength and adjustability to your stock or lifted vehicle. Built from thick wall tubing and specially formed to maximize tire clearance.
At the axle end they utilize an OE-style rubber bushing for long service-free operation and better isolation of noise, vibration, and harshness (NVH). At the frame mount they feature a large, forged flex end for strength, durability, and off-road articulation. The forged flex ends allow length adjustments to correctly position the rear axle and correct caster. Capable of 15-degrees of misalignment in either direction for more flex out on the trail.
- Heavy-duty construction, formed to improve ground clearance
- Fully welded ends with factory-style rubber bushing and large, forged flex end
- Designed for 0- to 5-inch lifts to correct front axle positioning and cast
Application Summary:
Year Make/Model 1993-1998 Jeep Grand Cherokee 1997-2006 Jeep Wrangler
| Attributes | |
| Bushing Material | Rubber |
| Bushings Included | Yes |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Construction | Tubular |
| Control Arm Material | Steel |
| Country of Origin (Primary) | US |
| Grease Fitting Included | Yes |
| Hazardous Material Code | N |
| Installation Time | 1-2 Hrs |
| Life Cycle Status Code | Available to Order |
| Lift Height | 0_6_5 |
| NAFTA Preference Criterion Code | B |
| Pvg Product Status | Active |
| SDR Required Flag | N |
| GTIN | 00711745607484 |